Armstead Trade Pliolite Based Masonry Paint is a professional quality, durable, solvent-based smooth masonry paint. Based on Pliolite® Acrylated Rubber resins, it provides a long lasting coating with good adhesion and resistance to moisture and alkali attack. It is easy to apply and provides good coverage. Armstead Trade Pliolite® Based Masonry is much more tolerant to showery or cold weather during application than traditional water-based exterior masonry paints, and can be applied to exterior masonry surfaces at virtually any time of the year. It is also BBA certified to provide up to 15 year protection.

• Up to 15 years protection
• Resistant to moisture and alkali attack.
• Can be applied down to -5°C
• Solvent based

Drying time (recoat)	12 hours
Drying time (touch dry)	1-1.5 hours
Suitable Surface	Masonry
Coverage	Up to 8m2/litre depending upon surface texture
General No. of Coats	1
Application description	STIR THOROUGHLY BEFORE USE. The normal finishing process is 1 or 2 coats of Armstead Trade Pliolite® Based Masonry. Touch dry 1-1.5 hours at 20ºC/65%RH. Recoat: 12 hours @ 20°C/65%RH. Drying time will vary according to temperature and humidity e.g. the drying times quoted will be significantly longer in cold, damp conditions. Coverage up to 8m²/l depending on surface texture. These figures are only an approximate guide and may be reduced. If in doubt, apply a small trial area first.
Cleaning	Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Paint: Scrape off leftover paint into a container for reuse. 2. Use Brush Cleaner: Use Polycell Brush Cleaner to clean brushes and rollers. 3. Reuse Brush Cleaner: Allow the paint solids to settle and reuse the cleaner by pouring the clear liquid into another container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Dispose of the remaining solids and used brush cleaner at a hazardous waste facility. Do not pour any solvent-based paint, brush cleaner or washings down the drain or onto the ground. Do not flush paint down the drain, including when cleaning painting tools